Guide:
- open z3x gui
- select model gt365
- check the port and set exactly
- connect cable ke500 rj-45
- press connect (press power on)
- click unlock (you can choose either read codes or direct unlock)
- disconnect phone after unlock
- insert locked sim inside
- enter manually the nck code read
- and you have successfull operation
- that's all.
PMB8888 Module 1.1 started. SW: Ver 2.2.2.175
Connecting to GT365 in UART Mode (COM19 ,230400)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8888) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading ...
Analising EEPROM...
Phone IMEI:012249004190686
Unlock codes:
NCK[0]: 88649599 (LOCKED)
NCK[1]: ?;;1725= (LOCKED)
Reading codes...
Sending SEC pack...
Reading ...
Analising EEPROM...
Phone IMEI:012249004190686
For operation finishing,do next :
1. power phone ON with original SIM
2. type 2945#*71001# to enter unlock menu
3. Enter one of this code(s):
NCK[0]: 88649599 (LOCKED)
NCK[1]: ?;;1725= (LOCKED)
