Prepare:
- z3x box lg act.
- rj45 pinout w/ rx,tx @ grnd (same in infinity pinout cable modified)
- phone pinout
- open z3x
- select proper model, comport @ higher baudrate
- tick uart then click connect by pressing power-on botton
- wait till phone detected
- and simply click read code's
- that's all
- power-on w/out simcard
- type this code 2945#*290#
- tick network unlock and enter the unlock code's
- done
Log's:
Loading module , please wait...
PMB8877 Module 1.2 started. SW: Ver 2.2.7.2
Connecting to GS290 in UART Mode (COM19 ,921600)
Please reconnect battery, press and hold power button...
Phone found! (MCU:PMB8877) prebooting...
Release power button. Booting...
Reading info...
BOOT Stage Finished , sending authority...
Sending SEC pack...
Reading EEPROM...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_14102010_164652.eep
Analising EEPROM...
Phone IMEI:359289038700882
Unlock codes:
NCK[0]: 4252554116666740 (LOCKED)
Finished in 3 seconds
Unlocking...
Sending SEC pack...
Reading ...
Backup Saved AS:C:\Program Files\Z3X\LG\LGI_SG3\BACKUP\GS290_autobackup_14102010_164700.eep
Analising EEPROM...
Phone IMEI:359289038700882
SimLock Data Cleared!
Writing ...
Sending SEC pack...
Unlock done!
Finished in 6 seconds