Samsung i9000 Download/Bootmode Solution

Too many people having the problem to put i9000 in downlaod mode to remove the user code or problem in too many pattern attempt...

Here is the 4 alternative solution:

1st > 

•  REMOVE BATTERY & PUT IT BACK
• HOLD VOLUME UP BUTTON & MIDDLE BUTTON (HOME BUTTON)
• WHILE HOLDING THIS TWO BUTTON PRESS POWER BUTTON AND REALEASE(PRESS POWER BUTTON ONLY ONCE)
• IT WILL POP UP WITH HARD RESET MENU
• SCROLL DOWN TO FACTORY RESET WITH VOLUME DOWN BUTTON THEN PRESS CENTER BUTTON OR HOME BUTTON
• THEN PRESS VOLUME DOWN BUTTON TO SELECT YES FACTORY SETTINGS THEN PRESS CENTER BUTTON
• SELECT REBOOT DEVICE AND PRESS CENTER BUTTON

2nd >

• Turn the power off. If your Samsung Galaxy S is frozen, pull the battery out and reinsert it
• Hold the Volume Down button
• Press and release the Power button
• You are now presented with a menu that allows for Fastbook, Recovery, Clear Storage, and Simlock
• Select Clear Storage by pressing the Volume Down button
• Press and release the Power button
• Now simply confirm your decision: Volume Up for YES and Volume Down for NO

3rd > Final Solution:

• Download Android sdk
• Extract this at the loacation c:\AndroidSDK
• Connect phone to PC and Install Drivers
• now go to Start > RUN > type cmd
• go to this directrory " c:\AndroidSDK\tools "
• now type " adb reboot download "
• Your phone will reboot and will go into bootmode.

Download ADB driver's from here (optional).

Or you can modify via hardware using resistor's 290k (ohm's), 300k (ohm's) or 301k (ohm's) to force bootmode.

Now you can flash using ODIN or any gadget that support this phone.

The above guide will also help you to debranding, flashing, remove usercode and pattern and also in changing langauge to chinise or etc.